MyDepots H.264 NETWORK Manual de usuario descargar pdf (Pagina 22)

Visionari Limited Liability Company Visionari Copyright(1.4)2010Version

http://www.mydepots.com

Manual for Remote Control-Router Without UPNP

3） Assure the net lamp that Router connects with DVR &Pc is on.

4） Assure IP of DVR and PC are within same subnet.

5） Assure when you Ping DVR’s IP through “cmd” in DOS interface, you could get

responding as below(here just take optional IP as example), which indicates net is

normal.

6） Assure the address you input in IE’s address bar is correct, in the meantime, confirm

inputting method is English.

7） You could close IE, reopen a new IE interface to visit.

2. Why I can’t visit DVR through DDNS ?

Please confirm following points to check step by step:

1) Please consider step 1 to assure whether you could visit DVR through LAN

2) Assure you operated Port forwarding correctly for Media &Web port on Router’s

interface.

3) Check in LAN other devices like PC could get on line or not, which can judge whether

your broadband is normal.

4) Assure you get correct clue for Router’s WAN IP, also guarantee you input visiting

address is right, it should be like 【http://】+【WAN IP】+【:】+【web port】 , common

mistake users make is either to miss 【http://】or 【:】+【web port】, or use wrong WAN

IP. If you could visit through WAN, then port forwarding is without problem, vice versa.

4) If you could visit through WAN, but can’t visit through DDNS, then it’s mainly

because configuration for DDNS on DVR’S operation interface is not correct, user

must input DDNS’s host name in full, i.e, vvmedvr123.dyndns.org, at the same time

it’s better to set password less than 8-digit.

5) Assure DNS IP inputting in figure 6 above is correct.

1 2 ... 17 18 19 20 21 22 23

Sin comentarios

MyDepots H.264 NETWORK Manual de usuario Pagina 22